Most viewed - Technical Stuff |
![Filename=Photo_stand_(04).JPG
Filesize=754KiB
Dimensions=1536x1152
Date added=Jul 24, 2006 Photo_stand_(04).JPG](albums/userpics/10128/thumb_Photo_stand_%2804%29.JPG)
Notice how much straighter Kimiko is standing with the "stance modifier" fitted. But to accomodate its extra height, I have to raise the boom another 150mm (6"). This pic also shows off the Body 6/7's slender waist and great legs.2355 viewsplatypus
|
|
![Filename=Photo_stand_(03).JPG
Filesize=772KiB
Dimensions=1536x1152
Date added=Jul 24, 2006 Photo_stand_(03).JPG](albums/userpics/10128/thumb_Photo_stand_%2803%29.JPG)
It's made of 38.1mm (1.5") cold-drawn seamless steel tube with a wall thickness of 2.6mm, and it flexes. Look at the effect Kimiko's 43kg has on it. But the length of the boom gives me a lot of freedom with photos.1931 viewsplatypus
|
|
![Filename=Dressing_stand_(4).JPG
Filesize=695KiB
Dimensions=1152x1536
Date added=Jul 24, 2006 Dressing_stand_(4).JPG](albums/userpics/10128/thumb_Dressing_stand_%284%29.JPG)
When I'm carrying her face to face, I can just walk right into the stand and hang her up.1919 viewsplatypus
|
|
![Filename=Dressing_stand_(3).JPG
Filesize=676KiB
Dimensions=1152x1536
Date added=Jul 24, 2006 Dressing_stand_(3).JPG](albums/userpics/10128/thumb_Dressing_stand_%283%29.JPG)
Another perspective showing the bracing. And Yoshiko's magnificent bum.1721 viewsplatypus
|
|
![Filename=Dressing_stand_(2).JPG
Filesize=623KiB
Dimensions=1152x1536
Date added=Jul 24, 2006 Dressing_stand_(2).JPG](albums/userpics/10128/thumb_Dressing_stand_%282%29.JPG)
It's pretty light, and I made it so that it'll fit through the doorways in the house. Mostly it stays in the bedroom.1264 viewsplatypus
|
|
![Filename=Neckbolt_with_nut___washer.jpg
Filesize=169KiB
Dimensions=657x634
Date added=Jul 20, 2007 Neckbolt_with_nut___washer.jpg](albums/userpics/10128/thumb_Neckbolt_with_nut___washer.jpg)
Neckbolt with nut and washer1092 viewsplatypus
|
|
![Filename=Dressing_stand_(1).JPG
Filesize=505KiB
Dimensions=999x1430
Date added=Jul 24, 2006 Dressing_stand_(1).JPG](albums/userpics/10128/thumb_Dressing_stand_%281%29.JPG)
This is the timber stand I made for dressing the twins. It's also where Yoshiko spends most of her time.938 viewsplatypus
|
|
![Filename=Dressing_stand_(5).JPG
Filesize=546KiB
Dimensions=1152x1536
Date added=Jul 24, 2006 Dressing_stand_(5).JPG](albums/userpics/10128/thumb_Dressing_stand_%285%29.JPG)
This arrangement allows me to adjust her height. High for dressing, low for hugging (the stand is not suitable for sex or photography, but is great for hugging her from in front or behind).824 viewsplatypus
|
|
![Filename=Photo_stand_(07).JPG
Filesize=645KiB
Dimensions=1152x1536
Date added=Jul 24, 2006 Photo_stand_(07).JPG](albums/userpics/10128/thumb_Photo_stand_%2807%29.JPG)
The top of the "stance modifier" and the end of the boom. When Kimiko is wearing her "stripper heels" it's maxed out. Note that the cable runs inside the steel tube.817 viewsplatypus
|
|
![Filename=Photo_stand_(01).JPG
Filesize=879KiB
Dimensions=1152x1536
Date added=Jul 24, 2006 Photo_stand_(01).JPG](albums/userpics/10128/thumb_Photo_stand_%2801%29.JPG)
These are the components of the photo stand I use for the twins. There's a base, three legs, the boom, three holders for counterbalance weights, and a "stance modifier."762 viewsplatypus
|
|
![Filename=Photo_stand_(02).JPG
Filesize=726KiB
Dimensions=1536x1152
Date added=Jul 24, 2006 Photo_stand_(02).JPG](albums/userpics/10128/thumb_Photo_stand_%2802%29.JPG)
It's huge. The boom has a reach of 1260mm (49") and stands 2130mm (7') high. The legs are 980mm (38.5") long. You can see I've added 40kg (90lb) of weights to one of the legs.735 viewsplatypus
|
|
![Filename=Photo_stand_(05).JPG
Filesize=716KiB
Dimensions=1152x1536
Date added=Jul 24, 2006 Photo_stand_(05).JPG](albums/userpics/10128/thumb_Photo_stand_%2805%29.JPG)
This is just a cheap winch from the hardware store, easily capable of lifting 43kg. It is firmly secured to the boom, and I replaced the cable with 4mm stainless steel wire rope.684 viewsplatypus
|
|
![Filename=Photo_stand_(06).JPG
Filesize=884KiB
Dimensions=1536x1152
Date added=Jul 24, 2006 Photo_stand_(06).JPG](albums/userpics/10128/thumb_Photo_stand_%2806%29.JPG)
The components of the "stance modifier," which measures 410mm x 205mm (16" x 8"). I got the design from other Doll Forum members, for which, thanks.683 viewsplatypus
|
|
|
|
|