Random files - FlashGordoll's Gallery |
|
|
"Why is the ceiling whirling around and around Flash??" 361 viewsFlashGordoll
|
|
|
|
|
|
|
|
|
Last additions - FlashGordoll's Gallery |
Gasket sealant for sticking the silicone tube to the rim of the chamber160 viewsFlashGordollSep 25, 2014
|
|
Under view of chamber gasket with Lexan lid108 viewsFlashGordollSep 25, 2014
|
|
8 mm copper tube silver soldered to vacuum chamber for mounting the vacuum plumbing133 viewsFlashGordollSep 12, 2014
|
|
Vacuum plumbing mounted onto chamber111 viewsFlashGordollSep 12, 2014
|
|
Under side of vacuum plumbing129 viewsFlashGordollSep 12, 2014
|
|
Mig welded sealing edge to thicken96 viewsFlashGordollSep 12, 2014
|
|
Thickened edge cleaned with angle grinder sanding disc, edge now measures between 5.5 and 6.5 mm110 viewsFlashGordollSep 12, 2014
|
|
MIG welded cylinder to 2 mm steel base87 viewsFlashGordollSep 12, 2014
|
|
Rear view of Vacuum pump/oil sight glass105 viewsFlashGordollSep 12, 2014
|
|
|
All these 5X parts will be attached to the vacuum chamber, still waiting for the tail end to fit the vacuum hose95 viewsFlashGordollSep 12, 2014
|
|
3 inlets are supplied with the pump, I ordered a 3/8 SAE 6mm bore hose fitting121 viewsFlashGordollSep 12, 2014
|
|
Copped propane tank, dimensions are 375mm diameter X 405mm height91 viewsFlashGordollSep 12, 2014
|
|
Chopped down the cylinder to 16 inches height, a 2mm mild steel plate with be welded to the bottom for the base87 viewsFlashGordollSep 12, 2014
|
|
Inside of chamber ground/cleaned with 36 grit angle grinder sanding discs98 viewsFlashGordollSep 12, 2014
|
|
Last viewed - FlashGordoll's Gallery |
|
|
|
|
|
Thanks for the can of beer Flash!279 viewsFlashGordollMay 11, 2024 at 06:12 AM
|
|
|
|
|
Love these new knickers Flash!806 viewsFlashGordollMay 11, 2024 at 03:11 AM
|
|